Panel type T38HAH-L-V-R-C-P Composition:
Core:
High-density wood particleboard core > 720 kg/m³, made with a mix of wood chips and low-formaldehyde resins (E1 class) in compliance with EN 312-1 standard, thickness 38 mm
Edge:
Anti-creaking plastic edge trim, thickness 0.5 mm
Bottom covering:
Tear-resistant reinforced aluminium foil, thickness 0.05 mm
Top covering:
Resilient materials or parquet
Physical and mechanical characteristics
Maximum admissible load (panel side): 720 kg
Classification (EN 12825): 2A21
Reaction to fire (UNI EN 13501-2:2009): Bfl_s1
Average thermal transmittance: 2.4 W/m²°C
Normalized lateral acoustic insulation RLwP: > 50 dB
(*) Data refers to the center of the panel side
Reference product:
T38HAH-L-V-R-C-P by Newfloor, combined with SNF S-L indoor steel structure
Composition:
Core:
High-density wood particleboard core > 720 kg/m³, made from a blend of wood chips and low-formaldehyde resins (E1 class), in accordance with EN 312-1 standard, thickness 38 mm
Edge:
Anti-creaking plastic edge trim, thickness 1.2 mm
Bottom covering:
Tear-resistant reinforced aluminium foil, thickness 0.05 mm
Top covering:
Porcelain stoneware, natural stone, or engineered stone
Physical and Mechanical Characteristics:
Concentrated load (panel side): 350 kg
Maximum admissible load (panel side): 800 kg
Classification (EN 12825): 3A21
Reaction to fire (UNI EN 13501-2:2009): Bfl_s1
Average thermal transmittance: 2.4 W/m²°C
Normalized lateral acoustic insulation (RLwP): > 50 dB
(*) Data refers to the center of the panel side
Reference product:
T38HAK-G by Newfloor, in combination with SNF S-L indoor steel structure
Composition:
Core:
Inert mineral core made from a single-layer blend of calcium sulphate and cellulose fibres, with a density of 1,100 kg/m³ and a thickness of 30 mm
Edge:
Anti-creaking plastic edge trim, thickness 1.2 mm
Bottom covering:
Tear-resistant reinforced aluminium foil, thickness 0.05 mm
Top covering:
Porcelain stoneware, natural stone, or engineered stone
Physical and Mechanical Characteristics:
Concentrated load (panel side): 400 kg
Maximum admissible load (panel side): 800 kg
Classification (EN 12825): 3A21
Reaction to fire (UNI EN 13501-2:2009): Bfl_s1
Average thermal transmittance: 3.8 W/m²°C
Normalized lateral acoustic insulation (RLwP): > 50 dB
(*) Data refers to the center of the panel side
Reference product:
G30AAK-G by Newfloor, combined with SNF S-L indoor steel structure
Composition:
Core:
Inert mineral core made from a single-layer blend of high-density calcium sulphate and cellulose fibres, with a density of 1,500 kg/m³ and a thickness of 34 mm
Edge:
Anti-creaking plastic edge trim, thickness 1.2 mm
Bottom covering:
Tear-resistant reinforced aluminium foil, thickness 0.05 mm
Top covering:
Porcelain stoneware, natural stone, or engineered stone
Concentrated load (panel side): 500 kg
Maximum admissible load (panel side): 950 kg
Classification (EN 12825): 4A21
Reaction to fire (UNI EN 13501-2:2009): Bfl_s1
Average thermal transmittance: 3.8 W/m²°C
Normalized lateral acoustic insulation (RLwP): > 70 dB
(*) Data refers to the center of the panel side
Reference product:
G34HAK-G by Newfloor, combined with SNF S-L indoor steel structure
Composition:
Core:
Inert mineral core made from a single-layer blend of high-density calcium sulphate and cellulose fibres, with a density of 1,100 kg/m³ and a thickness of 18 mm
Edge:
Anti-creaking plastic edge trim, thickness 1.2 mm
Bottom covering:
Hot-dip galvanized steel tray, thickness 0.5 mm
Top covering:
Natural stone or engineered stone
Concentrated load (panel side): 340 kg
Maximum admissible load (panel side): 550 kg
Classification (EN 12825): 1A21
Reaction to fire (UNI EN 13501-2:2009): Bfl_s1
Average thermal transmittance: 4.5 W/m²°C
Normalized lateral acoustic insulation (RLwP): > 45 dB
(*) Data refers to the center of the panel side
Reference product:
G18AT by Newfloor, combined with SNF S-L indoor steel structure
Composition:
Core:
Inert mineral core made from a single-layer blend of high-density calcium sulphate and cellulose fibres, with a density of 1,500 kg/m³ and a thickness of 30 mm
Edge:
Anti-creaking plastic edge trim, thickness 0.5 mm
Bottom covering:
Tear-resistant reinforced aluminium foil, thickness 0.05 mm
Top covering:
Resilient materials and parquet
Concentrated load (panel side): 380 kg
Maximum admissible load (panel side): 730 kg
Classification (EN 12825): 2A21
Reaction to fire (UNI EN 13501-2:2009): Bfl_s1
Average thermal transmittance: 3.5 W/m²°C
Normalized lateral acoustic insulation (RLwP): > 45 dB
(*) Data refers to the center of the panel side
Reference product:
G30HAH-L-V-R-C-P by Newfloor, combined with SNF S-L indoor steel structure
Composition:
Core:
Inert mineral core made from a single-layer blend of high-density calcium sulphate and cellulose fibres, with a density of 1,500 kg/m³ and a thickness of 34 mm
Edge:
Anti-creaking plastic edge trim, thickness 0.5 mm
Bottom covering:
Tear-resistant reinforced aluminium foil, thickness 0.05 mm
Top covering:
Resilient materials and parquet
Concentrated load (panel side): 480 kg
Maximum admissible load (panel side): 780 kg
Classification (EN 12825): 2A21
Reaction to fire (UNI EN 13501-2:2009): Bfl_s1
Average thermal transmittance: 3.5 W/m²°C
Normalized lateral acoustic insulation (RLwP): > 50 dB
(*) Data refers to the center of the panel side
Reference product:
G34HAH-L-V-R-C-P by Newfloor, combined with SNF S-L indoor steel structure
Core: made of inert mineral material consisting of a single-layer mixture of calcium sulfate and cellulose fibers with very high density (1,500 kg/m³).
Edge: anti-squeak plastic edge, 0.8 mm thick.
Bottom surface: unfinished.
Top surface: porcelain stoneware, natural stone, engineered stone, parquet, vinyl, or linoleum finish.
Panel module sizes: 60×60 cm, 60×120 cm.
Radiant module: made of thermally insulated polystyrene, size 570×570×35 mm, featuring special channels for housing the fluid conduits and a thermal diffusion plate.
The radiant modules thus obtained are ready to be installed using standard raised floor installation techniques, maintaining full accessibility of the plenum, and can be interconnected through special quick-connect fittings.
Reference product: Newfloor Radiant Module combined with SELF-CENTERING INDOOR STEEL STRUCTURE.
Core: monolithic inert ceramic material, frost-resistant, waterproof, with very high density (2,200 kg/m³), including fiberglass reinforcement mesh.
Edge (for indoor use only): anti-squeak plastic edge, 1.2 mm thick.
Bottom surface: not provided.
Top surface: porcelain stoneware finish.
Concentrated load (side): 336 kg
Maximum admissible load (side): 600 kg
Classification (EN 12825*): 2A21
Reaction to fire (UNI EN 13501-2:2009): Bfl-s1
Average thermal transmittance: 3.5 W/m²·°C
Normalized lateral sound insulation (RLWP): > 50 dB
*Data refer to the center of the panel side.
X-floor plus X15P0/X-K by Newfloor
INDOOR USE: the panel is supplied with a plastic edge and installed on a steel structure.
OUTDOOR USE: the panel is supplied without the plastic edge and installed on a polypropylene structure.
Core: made of ceramic stoneware with a thickness of approximately 10 mm, or natural/reconstituted stone with a nominal thickness of 20 mm.
Edge: anti-squeak plastic edge, 0.8 / 1.2 mm thick.
Bottom surface: mat made of bio–polyurethane, produced from natural raw materials such as mineral components (gypsum) and vegetable oils.
Dimensions: 60×60 cm (standard); other sizes available upon request.
Thickness: 10 mm
Maximum admissible load (on panel side, with 25×25 mm rubber-coated steel punch):
290 kg (K)
850 kg (G)
Weight per square meter:
26.4 kg/m² (K)
57 kg/m² (G)
Reaction to fire (ISO 3795 – UL94): Bfl-s1
*Data refer to the center of the panel side.
Freefloor FFK20 by Newfloor
Base: made of galvanized steel, 1.5 mm thick and 90 mm in diameter (radius 45 mm), featuring 4 stiffening ribs designed to improve adhesive injection. Square-shaped to ensure optimal installation near perimeter containment elements.
Head: made of cold-stamped steel, 2.6 mm thick and 80 mm in diameter, with 4 arms for housing the stringers.
The 4 stringer housing arms have been designed by Newfloor to ensure a perfect snap-on connection, eliminating the need for fixing screws and preventing axial rotation of the stringer.
Threaded rod: M16 threaded rod obtained by cold forming and rolling. External thread diameter tolerance: ±0.05 mm.
Tube: square-section, high-strength, hot-dip galvanized steel tube (18.5×18.5×1.2 mm), available in different heights, equipped with an adjustment nut positioned on the threaded rod.
Stringer:
Type “S” – without stringer,
Type “L” – light open-section stringer with 15/18 mm web and stiffening ribs,
Type “M” – medium open-section stringer with 30 mm web and stiffening ribs.
Module size: nominal 60×60 cm.
Galvanization: all structure components are hot-dip galvanized using the SENDZIMIR process.
The structure is completed with thermoplastic gaskets, installed at the panel contact points, serving as anti-vibration and impact-resistant pads, with thicknesses ranging from 1 to 2.5 mm.
Reference product:
SNF S-L-M by Newfloor
Base: made of galvanized steel, 1.5 mm thick and 90 mm in diameter (radius 45 mm), featuring 4 stiffening ribs designed to improve adhesive injection. Square-shaped to ensure optimal installation near perimeter containment elements.
Head: made of cold-stamped steel, 2.6 mm thick and 90 mm in diameter, with 8 arms designed for stringer housing through a snap-on connection system.
Threaded rod: M16 threaded rod obtained by cold forming and rolling. External thread diameter tolerance: ±0.05 mm.
Tube: square-section, high-strength, hot-dip galvanized steel tube (18.5×18.5×1.2 mm), available in various heights and equipped with an adjustment nut positioned on the threaded rod.
Stringer:
Type “S” – without stringer,
Type “L” – light open-section stringer with 15/18 mm web and stiffening ribs,
Type “M” – medium open-section stringer with 30 mm web and stiffening ribs,
Type “H” – heavy closed-section stringer with 25×25 mm web.
Module size: nominal 60×60 cm.
Galvanization: all structure components are hot-dip galvanized using the SENDZIMIR process.
The structure is completed with thermoplastic gaskets, positioned at the contact points with the panel, serving as anti-vibration and impact-resistant pads, with thicknesses ranging from 1 to 2.5 mm.
Reference product:
STF S-L-M-H by Newfloor
Base: made of galvanized steel, 1.5 mm thick and 90 mm in diameter (radius 45 mm), featuring 4 stiffening ribs designed to improve adhesive injection. Square-shaped to ensure optimal installation near perimeter containment elements.
Head: made of cold-stamped steel, 2.6 mm thick and 100 mm in diameter, with 4 arms for stringer housing, equipped with holes on the wings for fastening the stringers using trilobular screws.
Threaded rod: M16 threaded rod obtained by cold forming and rolling. External thread diameter tolerance: ±0.05 mm.
Tube: made of high-strength, hot-dip galvanized steel, Ø 20×2 mm, available in various heights and equipped with an adjustment nut positioned on the threaded rod.
Stringer: type “E”, heavy closed-section stringer with 50×25 mm web.
Module size: nominal 60×60 cm.
Galvanization: all structure components are hot-dip galvanized using the SENDZIMIR process.
Reference product:
SDF EXTRA by Newfloor
Base: galvanized steel with welded vertical support tube.
Head: galvanized steel with threaded tie rod and micrometric adjustment nut for fine leveling of the finished floor height.
Gasket: self-centering gasket positioned on the top of the column head, equipped with conical pins to ensure secure connection and locking between the structure and the panel.
Installation instructions (best practice):
Anchor the base of the foot to the slab using a single-component polyurethane adhesive (approx. 11 ml).
Position the gasket on the top of the foot.
Lay the panels by fitting the conical pins of the self-centering gasket into the conical holes present on the underside of the panels.
The assembled floor elements ensure the integrity and monolithic behavior of the raised access floor system throughout its service life.
Reference product:
S-Lock System self-centering structure by Newfloor
Special Evolve adjustable pedestals are designed to provide robust, self-leveling support for outdoor raised flooring systems. They feature an innovative self-leveling system that ensures greater stability during the installation of the flooring. Easy and quick to adjust, either by using the adjustment key or by rotating the base thanks to the new Locking Head system. The material used to manufacture Special Evolve adjustable pedestals is polypropylene, specially compounded to ensure long-lasting durability and increased load-bearing capacity.
Find the raised floor that best swits your needs